Available in Folding Frame (AWF) or Straight Frame (AWS) models

Folding Frame

AerWay-Standard-Folding-1The Salford AerWay® AWF Folding Frame machine has been developed to satisfy the demands of farmers working moderate to larger acreages. Salford AerWay’s Quick Adjust swing arms allow the user to choose the degree of compaction relief, cultivation, aeration, and residue incorporation. The AWF models are available in a variety of sizes, ranging from 20′ to 40′. The AWF200 and AWF25N units have a narrow transport width of 10′9″ while the AWF25W and AWF300 units have a transport width of 15′9″.

  • FRAME: Constructed of a heavy-duty center frame and two wing frames. These frames are structural weldments with integral weight trays. The unit is equipped with a weight transfer system that permits a constant down force across the width of the machine, while also permitting the wings to follow the contours of the field. Has category III front brackets and integral rear brackets and hard points ready for additional attachments.
  • ROLLERS: The heavy-duty rollers use four tines per row at 7.5″ tine spacing. Each roller shaft is mounted with two C-Flex Springs. The rollers are supported by 50 mm no-lube, trunnion-mounted bearings. The rollers are equipped with Shattertines®. All newer units use Outboard Stars to give uniform tine spacing across the working width of the machine.
  • QUICK ADJUST: Swing arms can be adjusted in 2.5° degree increments, from 0° to 10°, to vary the degree of cultivation or aeration.

 

Straight Frame

AerWay-Standard-Straight-1The Salford AerWay AWS Straight Frame machine has been developed to satisfy the demands of farmers working smaller to moderate acreages. Salford AerWay’s Quick Adjust swing arms allow the user to choose the degree of compaction relief, cultivation, aeration, and residue incorporation.

  • FRAME: Available in four width configurations: 8’, 10′, 12.5′, 15′, and 20′. Frame is a structural steel weldment with integral weight trays. Has category III front brackets and integral rear brackets and hard points ready for additional attachments.
  • ROLLERS: The heavy-duty rollers use four tines per row at 7.5″ tine spacing. Each roller shaft is mounted with two C-Flex Springs and supported by 50mm no-lube, trunnion-mounted bearings. The rollers are equipped with either Shattertines or Leaf Tines. All units use Outboard Stars to give uniform tine spacing across the working width of the machine.
  • QUICK ADJUST: Swing arms can be adjusted in 2.5° degree increments, from 0° to 10°, to vary the degree of cultivation or aeration.